The Old School Look with a Modern Advantage
The Elite Analog Gauge Panel is built for the custom builder who appreciates the timeless look of old-school mechanical needles. But it also solves the most frustrating part of any air ride system. No more crawling under the vehicle. No more laying in the trunk with a wrench in one hand and a rag in the other just to drain the tank.Mechanical Reliability
This system uses traditional 1/4″ airline hose. You’ll plumb it from the back of the gauge to the manifolds — typically located in the trunk of a car or at the back of a truck chassis. While this takes a bit more effort to install, it keeps your build old school. The result is unmatched mechanical reliability and real-time needle response.Tank Tap™ — One-Touch Moisture Management
We’ve turned a messy maintenance task into a stealth on-demand feature. Our exclusive Tank Tap™ technology integrates directly into the gauge housing. Because it uses a 3-way momentary switch, you aren’t limited to just one tank drain.This is a center-off design. That means you have two independent circuits right at your fingertip. One side is dedicated to your electric tank valve for an instant moisture purge. The other side is an open circuit ready for your next upgrade — a train horn, a deck lid popper, or a second tank drain for dual tank systems. No more searching for hidden toggle switches. Just a quick tap to keep your system dry and your build protected.The EZ High-Flow Tank Valve
This valve is the muscle behind your maintenance. It features a 1/4″ NPT thread that fits directly into the bottom port of our EZ 6-Gallon tank — or any standard air reservoir. It’s rated for 250 PSI and engineered to blast out moisture and sediment in a split second with the touch of a finger.This keeps your entire air system protected. From your manifolds and electric sensors to your gauges, everything stays safe from the internal moisture and debris that can compromise performance and longevity. We’ve included a 1/4″ close nipple for a secure, flush mount to your tank. A DOT-approved Push-to-Connect (PTC) exit fitting also comes included. So you can easily route moisture through the trunk floor with a short length of 1/4″ air hose for a professional finish.Pro Tip: The “Soda Bottle” Method
Don’t want to drill a hole through your trunk floor? No problem. Attach a 3 to 4 inch length of air hose to the fitting on the exit port. When it’s time for maintenance, place an empty soda bottle over the hose. Hit the Tank Tap™ button on your gauge. Then see exactly what you’ve purged from your system.What’s Included
- (1) Elite Dual Analog Gauge Bezel — Black Powder-Coated Finish
- (2) LED Lights — Bright LED Readout Lights & Power Wire Harnesses
- (1) Integrated Tank Tap™ 3-Way Switch — With Power Wire & Valve Wire Leads
- (4) 1/4″ x 1/8″ DOT Push-to-Connect Gauge Fittings
- (2) Tension Brackets — Sandwich mount the gauge to the panel
- (1) 1/4″ NPT High-Flow Electric Tank Valve — 250 PSI Rated
- (2) Switch to Tank Valve Wire Leads — 5′ Red Wire (To Power) / 15′ Black Trigger Wire (To Valve)
- (1) Brass DOT 1/4″ x 1/4″ Straight Fitting — For the valve exit port on tank valve
- (1) Brass 1/4″ Close Nipple — Connects the valve to the tank
- All necessary mounting hardware
